Howler site alarms
Howler site alarms are suitable for
temporary and/or larger applications. All different
models offer the facility to link up to 50 units
together simply using 2 core bell wire for up to 50m,
and 1mm 2 core for longer distances.
9v inter-linkable smoke alarms can also
be connected making the system fully automatic where
necessary. The system provides a reliable and
cost-effective alternative for situations where
conventional mains powered system would be
disproportionately expensive, especially in terms of
installation time.
|

MULTILINK OPTION |
-
Allows
up to 50 units to be daisy chained
together.
-
Can be
further enhanced by a control panel
with 4, 8, 12, 16 or 20 zones (see below).
-
9v
smoke alarms can be integrated into
system
|
|
|
|

STROBE OPTION |
-
Designed
for a noisy environments;
-
Ultra
bright red flashing strobe;
-
Mounted
on top of the Howler and can be seen
through 360o;
-
Reinforces
audible warning signal.
|
|
|
|
|
|
|
|

BATTERY TEST OPTION
|
-
Combines multilink option with a
battery test facility
-
Checks battery charge under load
conditions
-
Simple key switch operation
|
|
|
|
|
|
|
 |
-
Switch
illuminates to identify which unit has
operated in a multilink system
-
Designed
for use with the multilink option
-
Only
activated Howler illuminates
|
|
TRACE A LIGHT OPTION |
|
|
|
|
|

HOWLER CONTROL PANEL
(See below) |
-
Available
in 4, 8, 12, 16 & 20 zone models
-
Affected
zone indicated
-
Zones can
be isolated
-
Test mode
can reset the system after individual
Howlers have been tested
-
Evacuate
button activates all Howlers
|
|
|
|
 |
|
|
|
|
|
|
|
|






 
We Accept the Following Cards



|