FM200

HFC227ea UNITS (FM200)

	All units supplied with a sprinkler bulb operative at a temperature of 79°C as standard.
	Modular HFC-227ea units can be supplied in sizes from 1.0 to 21kg.
	Normally automatically operated Roof Mounted but also available with mechanical or electrical *override.
	Pressure gauge fitted as standard on all units.
	Pressure switch available on request.

	Relative light weight allows bulk head mounting.
	Light weight makes installation, handling and servicing easy.
	Cylinders can be located in fire risk areas.
	'Inverted' units fit vertically with discharge at bottom of unit.
	'Roof Mounted' units can be fitted vertically (discharge at top) or horizontally.

Cylinder qty (kg)	Unit Size mm	Area Protected (m³)	Cylinder type
*1.0	320 x 80	1.34	Alum
*1.5	370 x 108	2.00	Alum
*2.0	370 x 108	2.67	Alum

1.0	199 x 140	1.34	Steel
1.5	292 x 124	2.00	Steel
2.0	292 x 124	2.67	Steel
2.5	292 x 124	3.34	Steel
3.0	420 x 170	4.00	Steel
3.5	420 x 170	4.67	Steel
4.0	420 x 170	5.34	Steel
4.5	420 x 170	6.00	Steel
5.0	420 x 170	6.67	Steel
5.5	420 x 170	7.34	Steel
6.0	420 x 170	8.00	Steel
6.5	420 x 170	8.67	Steel
7.0	432 x 254	9.34	Steel
8.0	432 x 254	10.67	Steel
9.0	432 x 254	12.00	Steel
10.0	432 x 254	13.34	Steel
11.0	432 x 254	14.67	Steel
12.0	710 x 225	16.00	Steel
13.0	710 x 225	17.34	Steel
14.0	710 x 225	18.67	Steel
15.0	710 x 225	20.00	Steel
16.0	710 x 225	21.34	Steel
17.0	710 x 225	22.67	Steel
18.0	710 x 225	24.00	Steel
19.0	710 x 225	25.34	Steel
20.0	710 x 225	26.67	Steel
21.0	710 x 225	28.00	Steel

* Cannot be fitted with mechanical or electronic overrides

Buy Flamecheater Automatic Marine Fire Protection Systems.

Volume Calculation

To calculate the volume of your engine compartment:
Measure length (L), Width (W) & Height (H) of compartment in metres.

Volume = L x W x H

It is permissible to take off any areas such as tanks that are totally sealed within the space, but the volume of the engine should not be taken off, as if the engine is running when the system operates, it will draw in a percentage of extinguishant before stopping.

Back

Auto / Mechanical Units

All units supplied with a 2m long operating cable, pull handle and protective bracket, and a sprinkler bulb operative at a temperature of 79° C (175° F) as standard. Other ratings available on request.

Back

Auto / Electrical Units

All units supplied with latching plug in lead, 2m long. Power source required to operate each unit is 1 amp for 10 milliseconds. Sprinkler bulb operative at a temperature of 79° C (175° F) as standard. Other ratings available on request.

Back

Auto Roof Units

All units supplied with sprinkler bulb operative at a temperature of 79° C (175° F) as standard. Other ratings available on request.

Back

Maintenance & Servicing

Manufacturer's recommended maintenance checks and servicing procedures as follows:

Daily/Weekly - Check Gauge Pressure

Six monthly - Check Weight

10 Yearly - Hydrostatic Test by Manufacturer

Back