Automatic Fire Suppression Units
MP-2-0000 Novec 1230 Range
 |
 |
Clean Agent "Drop In" Halon Replacement. |
|
|
Low Global Warming Potential. |
|
|
Manufactured under BS EN ISO 9002
Quality Management. |
|
|
Stored Pressure - easy low cost maintenance. |
|
|
Suitable for B & C Fire Classifications. |
|
|
CE Marked - conforms with Pressure Equipment
Regulations 1999 (SI 1999 No. 2001) &
European PED 97/23/EC. |
|
|
Zero Ozone Depletion. |
|
|
Low Atmosphere life (0.014 years). |
|
|
1 Year Warranty - Manufactured in the UK. |
|
|
Safe for use on electrical equipment. |
|
|
Approved for use in Boat Engine Rooms. |
|
|
 The MP-2 range of
Automatic Fire Suppression Units are filled with NOVEC 1230 &
pressurised with Nitrogen to 12bar at 20°C. In the event of a
fire condition, the unites are designed to operate automatically
at a temperature of 68°C +/- 5°C, otherwise the maximum
storage/installation temperature is 60°C. The units are fitted
with a pressure gauge, pressure switch and pressure relief
device. Optional Electrical and or Mechanical release devices
are available. Now approved for use in Boat Engine Rooms. |
 |
Technical Specification
|
Extinguisher
Model |
Capacity |
Maximum Nett
Volume Protection |
Overall Height |
Overall
Diameter |
| |
KG |
cu.m. |
cu.ft |
mm |
mm |
| MP-2-2500 |
2.5 |
2.8 |
98 |
370 |
140 |
| MP-2-3000 |
3.0 |
3.3 |
116 |
370 |
140 |
| MP-2-3500 |
3.5 |
3.9 |
137 |
370 |
140 |
| MP-2-4000 |
4.0 |
4.5 |
158 |
370 |
140 |
| MP-2-4500 |
4.5 |
5.0 |
176 |
370 |
140 |
| MP-2-5000 |
5.0 |
5.6 |
197 |
440 |
170 |
| MP-2-5500 |
5.5 |
6.1 |
215 |
440 |
170 |
| MP-2-6000 |
6.0 |
6.7 |
236 |
440 |
170 |
| MP-2-6500 |
6.5 |
7.3 |
258 |
440 |
170 |
| MP-2-7000 |
7.0 |
7.8 |
275 |
440 |
170 |
| MP-2-7500 |
7.5 |
8.4 |
296 |
440 |
170 |
| MP-2-8000 |
8.0 |
9.0 |
317 |
440 |
170 |
| MP-2-8500 |
8.5 |
9.5 |
335 |
440 |
170 |
| MP-2-9000 |
9.0 |
10.1 |
356 |
440 |
170 |
| MP-2-9500 |
9.5 |
10.6 |
374 |
635 |
175 |
| MP-2-10000 |
10.0 |
11.2 |
395 |
635 |
175 |
| MP-2-10500 |
10.5 |
11.8 |
416 |
635 |
175 |
| MP-2-11000 |
11.0 |
12.3 |
434 |
635 |
175 |
| MP-2-11500 |
11.5 |
12.9 |
455 |
635 |
175 |
| MP-2-12000 |
12.0 |
13.5 |
476 |
635 |
175 |
| MP-2-12500 |
12.5 |
14.0 |
494 |
635 |
175 |
| MP-2-13000 |
13.0 |
14.6 |
515 |
635 |
175 |
| MP-2-13500 |
13.5 |
15.2 |
536 |
635 |
175 |
| MP-2-14000 |
14.0 |
15.7 |
554 |
635 |
175 |
| MP-2-14500 |
14.5 |
16.3 |
575 |
635 |
175 |
| MP-2-15000 |
15.0 |
16.8 |
593 |
635 |
175 |
|
Extinguishant - Novec 1230 - dodecafluror-2-methylpentan-3-one,
{CF3CF2C(0)CF(CF3)2}
Working pressure: 12 bar @ 20°C
* Base on a nominal 6% design concentration |
Discharge tine: 10 seconds
(nominal)
Cyl Test Pressure: 26 bar. |
Important: Maximum volume protected relates to Nett
volume, and this MUST NOT be
exceeded. Do Not use more that ONE
MP-2-0000 Automatic Fire Extinguisher in the volume to be protected.
If you were to use two or more smaller capacity extinguishers for
the same volume, there is no guarantee that all would operate at the
same time, and as a result may not give the required extinguishant
concentration level to extinguish the fire.
Novec™ 1230 Fire Protection Fluid,
dodecafluoro-2-methylpentan-3-one, {CF3CF2C(0)CF(CF3)2}, is a clear,
colourless and low odour fluid designed as replacements for ozone
depleting substances (ODSs) and compounds with high global warming
potentials (GWPs) such as HFCs and PFS. Novec 1230 fluid is an
effective fire extinguishing agent in standard fire scenarios where
halons historically have been used and where halon alternatives are
now being used.
Application: Nett Volume = Gross Volume less large permanently
fixed structures, namely engine blocks, fuel tanks and water tanks.
All other equipment should be classified as being part of the Gross
Volume. |
